TransCoat - Decorative Paint - ptsi

Go to content

Main menu:

TransCoat - Decorative Paint

Product/Service > Products > TRANSCOAT
TRANS DECO ALKALI RESISTANCE SEALER
Product Description : A vinyl plastic, high density flat finish specially formulated for ceilings. The high density of Trans Deco Ceiling ensures ease of application through reduced dripping and spatter, whilst the flat finish and high opacity enhances ceiling appearance.
Recomended Use : An interior surface coating specifically developed for ceilings, it’s flat finish helping to “hide” surface irregularities. Not recommended for use on walls or exterior applications. Ceiling in wet areas are best coated using an alkyd system
Physical Data :
Colour : Available On Request
Resin Type : Acrylic
Gloss Level : Low Sheen
Download
TRANS DECOGARD LOW SHEEN
Product Description : A though 100% acrylic low sheen finish with exceptional resistance to sun and weather and is resistant to fungal and algal growth, yet brushes wash out in water. There is no need for a primer or undercoat on most surfaces. The range of solid colours gives any surface a rich natural look. A comprehensive range of heritage colours are available.
Recomended Use : Suitable for use on almost any exterior and interior surface including timber, masonry, brick, fibre cement, galvanized iron, prepared and primed metallic surfaces and previously painted surfaces.
Physical Data :
Colour : Available On Request
Resin Type : Acrylic
Gloss Level : Low Sheen
Download
TRANS DECO CEILING
Product Description : A vinyl plastic, high density flat finish specially formulated for ceilings. The high density of Trans Deco Ceiling ensures ease of application through reduced dripping and spatter, whilst the flat finish and high opacity enhances ceiling appearance.
Recomended Use : An interior surface coating specifically developed for ceilings, it’s flat finish helping to “hide” surface irregularities. Not recommended for use on walls or exterior applications. Ceiling in wet areas are best coated using an alkyd system
Physical Data :
Colour : White
Resin Type : Acrylic
Gloss Level : Low Sheen
Download
TRANS DECOCRYL
Product Description : A though 100% acrylic low sheen finish with exceptional resistance to sun and weather and is resistant to fungal and algal growth, yet brushes wash out in water. There is no need for a primer or undercoat on most surfaces. The range of solid colours gives any surface a rich natural look. A comprehensive range of heritage colours are available.
Recomended Use : Suitable for use on almost any exterior and interior surface including timber, masonry, brick, fibre cement, galvanized iron, prepared and primed metallic surfaces and previously painted surfaces.
Physical Data :
Colour : Available On Request
Resin Type : Acrylic
Gloss Level : Low Sheen
Download
TRANS DECO MULTIPURPOSE
Product Description : A though 100% acrylic low sheen finish with exceptional resistance to sun and weather and is resistant to fungal and algal growth, yet brushes wash out in water. There is no need for a primer or undercoat on most surfaces. The range of solid colours gives any surface a rich natural look. A comprehensive range of heritage colours are available.
Recomended Use : Suitable for use on almost any exterior and interior surface including timber, masonry, brick, fibre cement, galvanized iron, prepared and primed metallic surfaces and previously painted surfaces.
Physical Data :
Colour : Available On Request
Resin Type : Acrylic
Gloss Level : Low Sheen
Download
TRANS DECO WEATHERCARE ACRYLIC
Product Description : A premium quality weathercare flat 100% acrylic coating designed specifically for exterior surfaces that require an extremely durable finish.
Recomended Use : For use on suitably prepared timber, brick, cement, stone, fibre cement, galvanized iron, bare iron and previously painted surfaces. May also be use on interior applications where a highly durable maintenance type finish is required.
Physical Data :
Colour : Available On Request
Resin Type : Acrylic Emulsion
Gloss Level : Flat
Download
TRANS ROAD MARKING SB
Product Description : A fast drying, acrylic solvent based synthetic gloss enamel. There is no need for a primer or undercoat on most surfaces.
Recomended Use : Suitable use for road marking.
Physical Data :
Colour : Available On Request
Volume Solid
: Approx 33%
Gloss Level : Gloss
Download
TRANS ACRYLIC TENNIS COURT
Product Description : An acrylic polymer coating designed specifically for tennis court surfaces, as is basecoat and topcoat.
Recomended Use : Trans Acrylic Tennis Court is a water thinnable coating specially formulated for tennis court surfaces that require an extremely durable finish and highly flexible nature ensures long-term protection. It may be applied to either concrete or bitumen surfaces.
Physical Data :
Colour : Green, Red and other colour on request
Resin Type : Acrylic
Gloss Level : Low Sheen
Download
TRANS DECO WALL FILLER
Product Description : Water based filler sealer.
Recomended Use :
Suitable for interior used where physical irregularities occur in brick, concrete or cement tender.
Physical Data :
Colour : White
Coverage
: Approximately 6 – 8 sq.m/ltr, depending upon the texture and porosity of the surface.
Package
: 5 kgs ; 25 kgs
Download
TRANS DECO FLAT
Product Description : A high quality general purposes paint that is suitable for interior and exterior use. This paint is ideally suited for use on wall and ceiling surfaces in low traffic areas such as bedrooms, etc. It is flat finish will help “hide” surface irregularities.
Recomended Use : Suitable for use in general living areas over suitably prepared timber, wallboards, brick, stone, fibre cement, plaster, cement and previously painted surfaces. For wet areas, an alkyd system is recommended.
Physical Data :
Colour : Available On Request
Resin Type : Styrene Acrylic
Gloss Level : Flat
Download
TRANS DECO INTERIOR
Product Description : General purposes paint with premium quality that is suitable for interior use only. This paint is ideally suited for use on wall and ceiling surfaces in low traffic areas such as bedrooms, etc. It is flat finish will help “hide” surface irregularities.
Recomended Use : Suitable for use in general living areas over suitably prepared wallboards, brick, stone, fibre cement, plaster, cement and previously painted surfaces.
Physical Data :
Colour : Available On Request
Resin Type : Styrene Acrylic
Gloss Level : Flat
Download
TRANS DECOSHIELD
Product Description : A water based satin 100% acrylic paint specially formulated for interior wall and ceiling surfaces which demand a hard wearing premium quality finish. This product is easy to apply and provides a scrubbable finish.
Recomended Use : For use on suitably prepared timber, brick, cement, stone, plasterboard and previously painted surfaces. Ideal for domestic kitchens, bathrooms, laundries, passageways and other high usage living area.
Physical Data :
Colour : Available On Request
Resin Type : Acrylic
Gloss Level : Satin
Download
TRANS DECOGARD EXTERIOR
Product Description : A though 100% acrylic low sheen finish with exceptional resistance to sun and weather and is resistant to fungal and algal growth, yet brushes wash out in water. There is no need for a primer or undercoat on most surfaces. The range of solid colours gives any surface a rich natural look. A comprehensive range of heritage colours are available.
Recomended Use : Suitable for use on almost any exterior surface including timber, masonry, brick, fibre cement, galvanized iron, prepared and primed metallic surfaces and previously painted surfaces.
Physical Data :
Colour : Available On Request
Resin Type : Acrylic
Gloss Level : Low Sheen
Download
TRANS ROAD MARKING WB
Product Description : A though 100% acrylic with exceptional resistance to sun and weather, yet brushes wash out in water. There is no need for a primer or undercoat on most surfaces.
Recomended Use : Suitable use for road marking.
Physical Data :
Colour : Available On Request
Resin Type : Acrylic
Gloss Level : Gloss
Download
TRANS DECO MASONRY
Product Description : This acrylic solvent based sealer is based on the latest in Polymer technology to give exceptional resistance to saponification and alkali attack. It is designed for use under both water based and solvent based finishes. It is easy to apply and gives a sound base for further finishing. It has been formulated to have excellent sealing properties for both interior and exterior cement and cementitious surfaces. Because of its highly penetrative properties, it has excellent adhesion, and can “bind” porous and chalky surfaces.
Recomended Use : Suitable for use on old or fully cured new cement surfaces such as render, and formwork to prevent alkali attack on the Finish coats. Suitable for other surfaces, such as brickwork, cement sheeting, plasterboated, etc.
Physical Data :
Colour : Clear
Resin Type : Pure Acrylic
Gloss Level : Gloss
Download
Back to content | Back to main menu