TAURUS - Bucket Productions - ptsi

• Fully engineered and proven up with the latest computer modelling and finite element analysis software.
  
• Only the best quality Q&T plate is used.
  
• First class quality control produces and practices with all records available to the end user.
  
• Light weight but very strong by using design innovations.
  
• Lower bucket tare weight lessens excavator cycle times and lowers fuel consumption.
  
• Lighter weight allows for larger capacity to maximize payload without exceeding the oem machines rsl/asl.
  
• Lighter design and larger capacities means less passes per loading cycle of each truck.
  
• Unique intermediate wall design from side wall to the top and bottom plates to maximize material flow and velocity into the bucket during the digging cycle and out of bucket on emptying substantially increasing cycle times.
  
• Unique intermediate wall design from side wall to top and bottom plates to add strength to connecting joints.
  
• Unique side intermediate wall design to lessen the hang-up of sticky materials and maximizing payloads per pass and out of bucket on emptying substantially increasing cycle times.
  
• Unique intermediate wall design from side wall to top and bottom plates to add strength to connecting joints.
  
• Unique side intermediate wall design to lessen the hang-up of sticky materials and maximizing payloads per pass.
  

• Lower bucket tare weight to allow larger capacities and greater fill factors.
  
• Proven designed to reduce the number of passes per loading cycle of the haul truck.
  
• Have less drag and less wear in operation due to the unique design compared to conventional designed buckets.
  
• Designed to have minimal wear packages fitted from new, no immediate need for any excessive wear packages or heavy heel blocks, i.e. we only fit an under floor and transition side wall wear package from new and only where required.
  
• Designed to limit carry back.
  
• Proven less spillage at the loading face through their design.
  
• Less hours for auxiliary equipment clean up at the loading face.
  
• Designed to fill and flow better.
  
• Designed to be capable of increasing cubic capacity easily and quickly in different material types and material SG.
  
• Designed to be within the oem’s asl of the excavator.
  

Full 12 months or 6000 hour warranty